To convert this to CSV, click the orange button in the scope mimic panel labelled “Bin_to_CSV_Tool” which downloads Bin2CSV.exe, and run it:Ĭlick Browse, locate your usr_wf_data.bin file and click Convert. Waveform Save is a shortcut to the Save/Recall menu Binary file save function and it produces a usr_wf_data.bin file for the browser to download. The orange buttons along the bottom allow direct access to some functions which are not available on the scope or are buried in menus. The scope has been set to a static IP address of 192.168.0.2, so visiting the address with a browser and then clicking on Instrument Control takes you to a mimic screen like this.Ĭlicking on the narrow button at the top right opens a control panel: This is connected to a x10 probe going into channel 4 of the scope. The FY6900 is set to AM waveform at 4 kHz and 4Vpp. This provides the fastest method of getting the waveform data from the scope, but the data can also be obtained using the Save/Recall button menu, saving the binary file to a flash drive. It was developed using a Siglent SDS 1104X-E scope which has an ethernet connection which allows direct control and file download using a browser, by setting a static IP address in the scope. This utility is only a file converter and does not communicate with the FY6900, so you need to have installed the FeelTech “DDS Signal PC Software” and the USB cable so that the resultant waveform can be stored in the FY6900. This is a utility for converting scope captures from a Siglent Digital Storage Oscilloscope into a format which is usable by a FeelElec FY6900 DDS Function/Arbitrary Waveform Generator so that it can stored in one of the Arb memories for replay. So I wrote a utility to convert from one to the other, and with some additional options. Since choosing the FeelTech FY6900 as my Arb, I found that it's software "DDS Signal PC Software" can import a list of points but the format is not the same as exported by the Siglent SDS 1104X-E. If you have invested in an Arb from the same family as your 'scope then this is as easy as moving a USB Flash drive from the 'scope to the Arb, but such Arbs are not the cheapest option out there. When you are developing an embedded device, you often find yourself capturing an interesting signal with the 'scope that you would like to send back into your device. Please note as this is an electronically delivered product, this item is non refundable. Other licensing methods are available upon request.Īvailability : Electronic Delivery within 2 to 3 Business DaysĮmbedded Studio Download & First Run (2:00)Įmbedded Studio New Project Creation (1:28)Įmbedded Studio CPU Support Packages (1:03) A PC locked License is a personal, non-exclusive license for an individual to use SEGGER Embedded Studio while locked to the MAC address of a PC where it was installed. your PC at work and your notebook at home) by simply plugging in your J-Link.Īnother option is to license SEGGER Embedded Studio to the PC for which it was installed. This allows full usage of SEGGER Embedded Studio on any of your computers (e.g. The license is stored on a J-Link or J-Trace, which then acts as a USB dongle. When SEGGER Embedded Studio is licensed to a J-Link / J-Trace unit, it is licensed for a single user, not limited to a single PC. Otherwise, please select the desired J-Link / J-Trace and it will be shipped with the corresponding SEGGER Embedded Studio license. The license key will be generated for the corresponding unit. If you currently have a J-Link or J-Trace unit, please select the radio option to enter the serial number below and then enter the serial number in the field provided. It may be licensed to a J-Link / J-Trace unit. SEGGER Embedded Studio may be licensed under a number of different license models. SEGGER Embedded Studio is a complete C/C++ development system for microcontrollers and microprocessors.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |